Showing posts with label front garden. Show all posts
Showing posts with label front garden. Show all posts

Sunday, April 16, 2017

More spring preparations


Cherry trees are blooming


The cherry trees in the front are blooming - the ones that survived that is.  Actually, some good news on the survival front, one of the tress that I thought had died is showing signs of life!   I didn't trim these trees this year in hopes that letting them go might help stabilize them a bit.  


Young (2nd year) sour cherry putting on some leaves!


Sweet cherry trees are blooming up a storm!



Thought this guy was dead, but see?  New leaves are coming!  The top did die out though.

Garden Preperations



I tilled the front patch in its new extended form, connecting the old front patch to the new big patch.  Now its all one big patch.  The front portion of the patch will hold strawberries and blueberries.



I just added two "permanent" fence posts for the corners.  I plan to just pound in some metal stakes to support the rest of the fencing.

Cleaned up the existing strawberry row.  There was quite a bit of weeds trying to take over.

I put the fence back in place until I can get the final fence put up.  Mom says that deer love strawberries so I figured I had better try to make them a little bit difficult to get to!

Tree Cages


I started putting up some more tree cages.  I started with the hazelnut since I figure they are the most at risk.    I used the old fencing from the big garden for a lot of these but I still had to use some new fencing.  I will need to buy more fencing!  I got all of the hazelnuts caged.  I also found another stash of old fencing that I will use first before any new fencing.   I also caged the new pecan trees.



I mowed this area too - it was still fairly wet as you can tell from the mower wheel marks.


Hazelnuts



Speaking of hazelnuts, the "old" hazelnuts are well into coming out!  I wonder if they get nuts on this year?






Birds nest


I found this bird nest right on my fastener shelf!  Even has eggs in it.  Damn bird.  Turns out to be a house wren, so I want to leave it alone.  Sigh.  Stupid birds!



I have seen her sitting on these eggs.  I try not to get too close, but its near where most of the stuff I need is!


Table-saw pusher



I was watching you-tube videos and noticed someone using this type of pusher.  Then I realized I didn't have one like this, so I made one out of some of the scrap locust.  I just eyeballed the design - sketched it onto piece of wood and then traced the handle from a hand-plane.   Then I used the little band-saw to cut it out.  I used the big belt sander to smooth most of the edges and the little belt sander to get into inside curves.  I discovered I needed some new sandpaper for the little belt sander!  I ordered some more from ebay as well as a new small belt sander!




I think it turned out pretty nice for about 30 mins of work!


More plane-blade sharpening



I continued to put my new wide blade tool to good use sharpening the wide hand-plane blades.  It takes a long time - so much more metal on these big blades!  I really like the new sharpening jig though.  I also attached the honing wheel and polished up the blade to razor sharp!

I also read about how far back to put the chip-breaker on this type of plane.  Basically, if you want big chips, pull the chip breaker far back.  If you want fine chips (ribbon thin) put the chip breaker about half a mm from the edge of the blade.  The chip breaker itself should have a clean edge - maybe run it through sharpening process to be sure (don't sharpen so much as put a clean edge on it!)




I put the micro-bevel on using the finest grit wheel that I have (I think its 3000).  Then polished it with green chromium polish on a leather wheel.  Mirror finish!

Amaryllis still going crazy!



These flowers are doing great things this year!  Beautiful!





Sunday, May 8, 2016

Planting more Forsythia and more spearmint.


But first, Mower upkeep!


It started out as a rainy weekend so I thought I would get some machine maintenance done.  I changed the oil on the Cub Cadet Zero turn and also replaced the mower blades.  Why not just sharpen them you say?  Well, if I had taken pictures I would show you, but suffice to say - those old blades were totally F'ed!  They were split down the center - every single one (3 blades)!  I also lubed the spindles and the front wheel mounts.  It turns much easier now and sharp blades makes such a difference in the quality of the cut!  Once the rain stopped and the grass dried (later on Saturday) I mowed most of the farm - skipped only paw-paw patch and a section of the front lawn - they didn't need mowing yet.

Here are the Hazelnuts (filberts)


The new area with the locust trees ( I am considering relocating some locusts and maple here too)


Panorama shot 




Orchard, vineyard, and some of the "big" garden

Lots of mowing!  Anything that I didn't mow this weekend I plan to mow with the flail mower on the big tractor later in the month (or maybe next month). I tried to mow the tricky areas with the little mower since its more stable.


Septic-tank pumpout


I checked the tank level and found that it was over the inner lid, so I called Chestnut to pump us out. He came right over (he must have been on the road already) and did the pumping.  It was curious that there was only CLEAR water above the lid!  This somewhat confirms my suspicions that a lot of the liquid in the tank is from rain and runoff water that seeps in through the concrete blocks around the tank access cover.  I mentioned this to Chestnut (Jim) and he said it was likely, but nonetheless the tank should drain that out without problem.  Good point.  He mentioned that I maybe should take the backhoe and dig out the distribution hub to see if it is rusted shut or something.  He said there is nothing "illegal" about that - the government (DEP) only regulates access to below that hub (no digging up your own drainage field!).  Also, Jim mentioned that I should consider putting a new eye bolt through the tank access lid since the handle looks like its gonna rust out soon.  I will do that later. I am considering the backhoe idea.  Later.

Planting more Spearmint!


We stopped by Mom's place Saturday morning (it was raining Friday evening when we arrived so we skipped stopping there then) and picked up some spearmint that she had saved for us.  It looked like a little bit at first, but then I dug into it and it was quite a large piece of the rhizome!  I split it up into several pieces and planted some near the woodshed and some near the peepers pond!  Mom says it likes drier areas, but I remember it growing in back of the spring house (I think), so hedge my best I planted in wet, semi-wet and dry locations!


Some near the woodshed


Some near the peepers pond





More Forsythia


I grabbed some more forsythia while we were at mom's place.  I wasn't sure how much I needed, but I was sure I didn't have the time to put in (or get) as much as I needed!  So, I just got a bagful and took them home to transplant.  I replaced a couple that died along the house side of the stream and then I planted the rest, 31 plants, on the other side in front of the garden. I spaced them 6 feet apart and 14 feet from the edge of the road.

I marked every other one (approx) with yellow flags so that the road mowers could see them




31 plants took me to about 14 feet past the elderberries .  Fingers crossed that these take hold quickly!  There is some pretty clay bound soil here - I don't know if forsythia like that...

Vineyard Trimming and cleanup


I was able to get out and do a bit of cleanup of the vineyards.  I examined the "marquis" grapes - all have sprouts out - BUT - the sprouts on one had been snipped off!  Bird? Cut-worm?  I hope it recovers!  I have hopes that by feeding the grapes nitrogen (blood meal) early this season will help these guys take off and get strong enough to resist any fungus issues.  Also, with sulfur treatments I hope to keep the fungus out!




Concords are kicking it!

Wine grapes are small - but they seem mostly healthy.  They all made it through the winter!



Cleanup of the blueberries


The blueberries were getting overrun with grass and weeds so I attacked them with the weed wacker. They cleaned up ok,  I don't see and blossoms or berries - I guess the frost got them this year.  Sad. But maybe this will help them grow more this year!  I really should have put more sawdust on these after I trimmed to discourage more weeds growing near them - but I was out of time.

They are there - they all survived!

Maybe they will grow better this year for all the mulch, epsom salts, and sulfur I put on them?  I need to put more sawdust on these.

Blackberry patch cleanup


Yes, I just cleaned up this patch not too long ago, but I wanted to keep it nice.  I noticed that one of the plants that I accidentally trimmed off last time has re sprouted and grown quite a bit! Yay!


A good number survived, but I wish more had.  Lots of gaps there.


Some milling machine arbor work


I re-measured the arbor and found that I hadn't made the mistake that I thought I did! Yay! So we are still good to go.  I started cutting down some of the diameter for the collet insert part.  I figure I am most likely to screw this part of the thing up, so if I screw this up I don't have to waste time on the rest! LOL - positivity!  I was taking some big cuts and noticed some vibrations and waviness in the surface.  I wil have to see whats causing this!  Maybe the arbor is too long and needs center support?  Maybe I just need to take lighter cuts?  I was taking 40/1000ths (.04 inches) at a shot - which is pretty big for tool steel. 

Cutting it down on the collet holder side.

See the thread-like squiggles near the shoulder?



plenty of chips!


State of the farm overview!


Mayapples in  bloom!



There are little pears on this pear tree!  Hard to see though.  I took several pics to be sure to catch them!



Strawberries are looking good!

Garlic

potatoes